Valspar

Harp Strings

V115-1

Harp Strings is a bright, soft gray with a faint blue-green coolness. The cool blue-green hint makes it useful beside gray tile and nickel fixtures. Use it where white is too stark but beige would clash, such as a bath with cool tile or a hallway with gray flooring.

The color will not bring much drama. That is the point. Warm trim can make it look slightly cooler by comparison. Test beside existing doors before using it as a whole-house neutral.

Brand

Valspar

Code

V115-1

Harp Strings in Different Light

Light temperature is measured in Kelvin: a warm 2700K bulb pulls colors toward yellow, while 5000K daylight reads cooler and truer. Check the color at the time of day you actually use the room.

Artificial Lighting

Bedroom scene to simulate Valspar Harp Strings under artificial light

Natural Lighting

Living room scene to simulate Valspar Harp Strings under natural light

Technical Specifications

Undertones

Type

Cyan/Teal

Strength

Low

Temperature

neutral

Hue Angle

192°

Cyan Family

Lightness

85%

Light

Saturation

7%

Very Muted

LRV

69.3
0%100%
Very Dark
Dark
Medium
Light
Very Light
White

LRV measures how much light a color reflects, from 0 (black) to 100 (pure white). Below about 50 a color needs good lighting to avoid going flat, 60 and up helps brighten a room, and most whites sit above 80.

Color Position
Saturation →
Lightness →

Color Codes

HEX
#d6dadb
RGB Decimal
214, 218, 219
RGB Percent
83.9%, 85.5%, 85.9%
HSL
192.0, 6.5%, 84.9%
HSV
192.0, 2.3%, 85.9%
CMYK
2.3%, 0.5%, 0.0%, 14.1%
YIQ
216.9, -2.7, -0.5
XYZ
65.59, 69.55, 76.99
CIE Lab
86.78, -1.16, -0.97
CIE Luv
86.78, -2.29, -1.28
Hunter Lab
83.40, -1.15, -0.97
Decimal
14080731

Coordinating Colors and Color Palettes

Lighter Shades

Monochromatic light

Complementary

Opposite on color wheel