Valspar

Soft Rabbit Brown

1002-9C

Soft Rabbit Brown sits in medium taupe-brown territory with a warm gray cast. It feels understated. The shade can ground a small office, built-ins, or an exterior accent without going as dark as espresso.

Low light shifts it toward mushroom brown. Use off-white trim for contrast and black hardware for definition. Red-toned wood may bring out the brown side more than expected, so test before committing.

Brand

Valspar

Code

1002-9C

Soft Rabbit Brown in Different Light

Light temperature is measured in Kelvin: a warm 2700K bulb pulls colors toward yellow, while 5000K daylight reads cooler and truer. Check the color at the time of day you actually use the room.

Artificial Lighting

Bedroom scene to simulate Valspar Soft Rabbit Brown under artificial light

Natural Lighting

Living room scene to simulate Valspar Soft Rabbit Brown under natural light

Technical Specifications

Undertones

Type

Orange

Strength

Low

Temperature

warm

Hue Angle

19°

Red Family

Lightness

50%

Medium

Saturation

12%

Very Muted

LRV

20.5
0%100%
Very Dark
Dark
Medium
Light
Very Light
White

LRV measures how much light a color reflects, from 0 (black) to 100 (pure white). Below about 50 a color needs good lighting to avoid going flat, 60 and up helps brighten a room, and most whites sit above 80.

Color Position
Saturation →
Lightness →

Color Codes

HEX
#8d7970
RGB Decimal
141, 121, 112
RGB Percent
55.3%, 47.5%, 43.9%
HSL
18.6, 11.5%, 49.6%
HSV
18.6, 20.6%, 55.3%
CMYK
0.0%, 14.2%, 20.6%, 44.7%
YIQ
126.0, 14.8, 1.4
XYZ
20.75, 20.51, 18.19
CIE Lab
52.41, 6.20, 7.78
CIE Luv
52.41, 12.85, 9.29
Hunter Lab
45.29, 5.10, 5.87
Decimal
9271664

Coordinating Colors and Color Palettes